Best writers. Best papers. Let professionals take care of your academic papers

Order a similar paper and get 15% discount on your first order with us
Use the following coupon "FIRST15"
ORDER NOW

the video and summarize it by answering the questions.

/in /by

Write a single space (11 font) one to two page summary paper on the Deep dive experience of the IDEO company as you have seen it in the video we showed in class. Comment on the different strategies and techniques that the company uses which lead to successful innovative projects. Comment on the innovative ambiance of the company and how it effects positively into developing innovative new products. Also, discuss how team work and leadership as practiced by the company are key elements of success. Finally, identify and summarize key issues and secrets that they adopt that leads into successful products.PLEASE DON’T COPY FROM OTHER WEBSITE AND NO PLAGIARISM.

ABC company’s vice president of marketing proposes a new program

Question ABC company’s vice president of marketing proposes a new program to significantly increase product sales by 250,000 units per year throughout the 1998-2004 period. Specifically, it is suggested that the company take the following actions: A. Spend $2.5 million over the period of 1998-2000 as promotional expenditures – for example, spend $1.0 million each in the years 1998, 1999, and $0.5 million in the year 2000. B. Make a one-time investment of $1.4 million in plants and equipment needed at the beginning of 1998 to generate these additional products. No new warehouse capability is needed. This investment is to be depreciated on a straight-line basis over the seven-year period. There will be no salvage values for these plants and equipment in 2005. It is further assumed that the product unit cost is $8.00 in 1998, and it is estimated to increase by 3 percent per year. The product unit price is $20 in 1998, and it is estimated to change as manifested in the following table:  Items 1998 1999 2000 2001 2002 2003 2004 Unit Price $20.00 $20.60 $21.00 $21.15 $21.25 $21.25 $21.00 The SG

For the photovoltaic module Jinko “JKM275PP”; located where the, “lowest

Question For the photovoltaic module Jinko “JKM275PP”; located where the, “lowest expected operating temperature” is zero degrees celsius, what is the “maximum voltage” (Voc-max) of a single module. NOTE: Voc max FOR THIS Module is 39.1V. at 0 Degrees Voc- max is 110% of the original Value.

  1. a) 39.1V.
  2. b) 43.01V, according to Table 4.1 in AS/NZS 5033:2014
  3. c) 42.03V, according to clause 4.2 in AS/NZS 5033:2014
  4. d) Both (b) and (c)

Would KVL be used to find Ix and then that

Question Would KVL be used to find Ix and then that value used too determine power absorbed? src=”/qa/attachment/9528907/” alt=”Screen Shot 2019-08-26 at 5.29.34 PM.png” /> ATTACHMENT PREVIEW Download attachment Screen Shot 2019-08-26 at 5.29.34 PM.png Find the power absorbed by the dependent source in the circuit in the figure.

ABC company wants to develop a new product for a

Question ABC company wants to develop a new product for a high-end consumer market. It is known that customers in this market are difficult to identify and are geographically dispersed. How should the company plan for product distribution?

can you help me to figure out the answer of

Question can you help me to figure out the answer of the two Questions alt=”屏幕快照 2019-08-26 下午7.52.08.png” /> ATTACHMENT PREVIEW Download attachment 屏幕快照 2019-08-26 下午7.52.08.png PROBLEM 1.3: Suppose that a continuous-time signal Te(t) has the Fourier transform shown below: Xc(jf) 15 – 57T 57 The signal is used as the input to two different systems, one without an anti-aliasing filter: C/D D/C

This question was created from HW1 https://www.coursehero.com/file/15871835/HW1/ There is no

Question This question was created from HW1 https://www..com/file/15871835/HW1/ There is no solution ATTACHMENT PREVIEW Download attachment 15871835-337813.jpeg 4. (Exercise) Let A = a a, – a e R’ MXn where a, ER

This question was created from HW1 https://www.coursehero.com/file/15871835/HW1/ What are the

Question This question was created from HW1 https://www..com/file/15871835/HW1/ What are the solutions to this question? ATTACHMENT PREVIEW Download attachment 15871835-337812.jpeg For each of the following expressions, use the definitions above to find equivalent expressions, specifying the entries in the answer as far as possible given the representation of the original matrix . Think about the size of each entry in the resulting expressions. (For example y b, ER is a scalar, whereas Db ER

Please answer the following question as accurately and as fast

Question Please answer the following question as accurately and as fast as possible ATTACHMENT PREVIEW Download attachment Screen Shot 2019-08-27 at 10.47.03 am.png 1. The finned cylinder of a combustion chamber (k = 240 W/m.K) is to be air cooled as shown below. 1 = 2 mm 6 = 2 mm MM 1 = 60 mm To, h = 70 mm = 80 mm The air is at 45

Determine the resonant frequency for the circuit shown below where.

Question Determine the resonant frequency for the circuit shown below where. The components values are L = 100 micro Henry and C = 100 micro Farad. ATTACHMENT PREVIEW Download attachment 13.jpg

Calculate the following transformer’s input impedance and Voltage Source Voltage.

Question  Calculate the following transformer’s input impedance and Voltage Source Voltage. ATTACHMENT PREVIEW Download attachment 14P.jpg VS —::~ Primary Current Primary Impedance Primary Turns = 4n Secondary Current = 100 m A R 2.0M! Secondary Turns = 5

i want some ideas about the affecting factors for my

Question i want some ideas about the affecting factors for my report please( style=”background-color:transparent;color:rgb(56,118,29);”>All operations which have any bearing on the performance or success of the test)Introduction and BackgroundConcrete and steel are the main construction materials; however, over ten times more concrete is produced than all other construction materials put together, more than 1 m3/year for every person on the planet!The properties of concrete are governed not only by the properties of its ingredients (cement, water, sand, and coarse aggregate) but also, to a great extent, by the relative proportions of these ingredients. The proportions must be selected so as to produce a concrete mix of the desired workability, strength, durability and economy.The aggregate mentioned above is divided into coarse aggregate and fine aggregate – aggregate which passes the 4mm sieve aperture is called fine aggregate whereas that retained on a 4mm sieve is called coarse aggregate. Although the division is purely arbitrary it is important to have a gradation of aggregate particles in the concrete mix ranging from approximately 20mm down to about 150m. If all the aggregate particles are of the same size, or if too many fine particles are present, an excessive amount of cement paste will be required to produce a workable mixture; a range of sizes aids in the production of an economical concrete mix.Procedure: OverviewYou will be required to fabricate standard concrete cubes (3 x100mm) and cylinders (1 x 300 height x 150mm diameter) for compression testing. Whilst still in the fresh (i.e. liquid) state you will carry out a workability test on your concrete mix, which is usually measured by its slump. The standard method of measuring slump consists of placing the freshly-mixed concrete in a mould in the form of a truncated cone, 300mm high, 200mm in diameter at the2bottom, and 100mm in diameter at the top. The concrete is placed in the slump cone in three layers, each layer rodded 25 times to compact it. When filled, the mould is immediately withdrawn by lifting it gently, and the slump of the concrete is measured at the vertical distance from the top of the mass to its original 300mm height. An increase in the amount of mixing water will increase the slump, but it will also decrease the strength and increase the tendency of the ingredients of the concrete to segregate unless more cement is added. Increasing the amount of cement paste increases the cost, so all three factors – strength, workability, and cost – are interrelated in a complex way.After casting, the cubes will be covered with polythene and at approximately 24-hours demoulded (by staff) and submerged in a curing tank until required for testing. Tests will be undertaken at 7-days (by students).

Hi ThereHow long does it take to get solutions for

Question Hi ThereHow long does it take to get solutions for the questions submitted? />I submitted questions on Saturday the 24 August 2019 in the afternoon regarding the strategic management case study.Thanks

Using dimensions of 29 mm for the outer diameter of

Question Using dimensions of 29 mm for the outer diameter of the tube 26 mm for the inner diameter of the tube find the maximum stress exerted on the the seat tube and bottom bracket joint. How to calculate the area of the tube.

Please explain all steps and write neatly. I appreciate the

Question Please explain all steps and write neatly. I appreciate the help ahead of time. ATTACHMENT PREVIEW Download attachment image1.jpeg A double-pane window uses two 6-mm thick pieces of plate glass separated by 6 mm of dead air. The surface of the window inside the house is exposed to air at To = 20 C having h =8 W/m2 . K, and the surface of the window outside the house is exposed to air at T =-10 C having ho =35 W/m2 . K . Assume kaj =1.1 W/m . K for the plate glass and k =0.025 W/m . K for the dead air between the pieces of glass. a) Find the heat flux through the window (answer: 74.2 W/m?). b) Find the temperature on the inside surface of the window (answer: 10.7.C).

Please help me with the following problems write given,determine

Question Please help me with the following problems write given,determine

Problem #1A nearly horizontal channel has a bottom width of

Question Problem #1A nearly horizontal channel has a bottom width of 3 ft, and it carries a discharge of 60 cfs at a depth of 4 ft. Determine the magnitude and direction of the hydrostatic pressure force exerted on each of the sidewalls per unit length of the channel if:(a) Thechannelisrectangularwithverticalsidewalls(b) Thechannelistrapezoidalwitheachsidewallslopingoutwardataslope2horizontalover1vertical, that is m = 2.

Problem #4A trapezoidal channel with bottom width b = 5

Question Problem #4A trapezoidal channel with bottom width b = 5 ft and side slopes m = 2 (that is 2 horizontal over 1 vertical) carries Q = 100 cfs at depth y = 3.15 ft. The water temperature is 60 F, and the kinematicviscosity at this temperature is ν = 1.217 * 10-5 ft2/s.(a) Determineiftheflowisturbulentorlaminar.(b) Determineiftheflowissubcriticalorsupercritical.

PLEASE ANSWER ALL QUESTIONSA 3-MW wind turbine possesses the basic

Question PLEASE ANSWER ALL QUESTIONSA 3-MW wind turbine possesses the basic circuit diagram shown in Fig. 24.36 of the textbook. The turbine speed is 21 r/min and the gearbox has a ratio of 1:100. The output of the double-fed generator is connected to a 60-Hz grid and the stator has 4 poles. The turbine produces its rated 3 MW when the blades rotate at 20 r/min. Neglecting all power losses at various components, calculate: (a) the synchronous speed of the generator; (b) the speed of rotation of the rotor; (c) the value of the slip speed; (d) the value of the slip; (e) the power output of the stator [MW]; (f) the power output of the rotor to converter (5) [MW]; (g) the power carried respectively by converters (5) and (6) [MW]; (h) the ratio of power carried by converter (5) to the total power (3 MW) produced by the turbine [%]; and (i) the frequency generated by converter (5). ATTACHMENT PREVIEW Download attachment m1 q3.jpg

How can engineering managers make the best use of tools

Question How can engineering managers make the best use of tools such as the Myers-Briggs Type Indicator (MBTI) to assist in selecting project leaders or assigning employees to teams to ensure the likelihood of avoiding personality conflicts that could otherwise hinder team success?

I need you to answer these 4 foundation engineering questions. The questions

I need you to answer these 4 foundation engineering questions. The questions are in the files. ask me if you need any question.I need the answer in word file.

The post the video and summarize it by answering the questions. appeared first on Smashing Essays.

 
Looking for a Similar Assignment? Order now and Get 10% Discount! Use Coupon Code "Newclient"