Question 1. Attached are the details for the entire project
Question 1. Attached are the details for the entire project and the
details for Part 1. Will post part 2 after Part 1 is finished.
Case Study- Director’s Request for PCs using MS Word Table, MS Access, and MS PowerPointCase Study – Using MS Office 2010 / 2013 / 365Please use the document “READ FIRST – Case Study Instructions – Director’s Requirements” for each of theparts described below.Part 1: Specifications Table (MS Word)Use the project description HERE to complete this activity.For a review of the complete rubric used ingrading this exercise, click on the Assignments tab, then on the titleCase Study Part 1 – PC Specs (Word)–click on Show Rubrics if the rubric is not already displayed.For the case study provided to you, create MS Word tables that identify and contain the hardware and softwarerequirements to meet the director’s requirements.The MS Word document in its final form will include 6MS Word tables.It will include a two-paragraph narrative summary that classifies the user type and identifies the PC categorythat will berecommended. The specific instructions are found in the table at the end of this file.Students are expected to conduct external research to adequately address all aspects of the assignment requirements.Itis suggested that students use a computer manufacturer’s site (i.e., Apple, Dell, Toshiba) to help in identifying all thecomponents needed to meet the director’s requirements.Remember, although there are 5 computers to be purchased,you are required to configure only one, as the same one may be purchased for all 5 employees.Any outside sourcesshould be correctly cited in APA style at the end of the table.Students will need to include specific requirements from thecase study to show why each item is being recommended. Each element listed below must be incorporated into theassignment.Omissions will result in loss of points.Make and model and description are required, when at all possible..For example, if the solution suggested is a 32” IBMMonitor, say so. Do not just say monitor because that does not provide sufficient information for a purchase.It is notnecessary, for example, to identify the make and model of a USB port.
You must also consider components that may be a part of a machine or device.For example, the System Unit table willrequire elements such as USB ports.The monitor and mouse are typically separate devices on a desktop, but on a laptopor tablet they are often integrated.You should identify the various forms of input and output for your computer(s) on theHardware table, whether they are separate devices or integrated elements.There should be sufficient detail in this case study for procurement/purchasing personnel to buy the systems.Details arecrucial.Don’t focus on web references as to wherethe equipment can be found, although you may include your source(s).Focuson a solution to specific requirements.Do not ‘number’ requirements in your table, even though they are numbered in the “Case Study – Director’sRequirements’ document.In many cases there are several requirements expressed in a single numbered listing.It’simportant that you are clear about which requirement is addressed by a specific piece of hardware or software.All identified hardware and software and relevant requirements must be listed in the tables.Mentioning an item or arequirement in the two paragraph narrative is perfectly ok, but it must also be in the tables.Additional information:You are supposed to tie back your recommended specs to all of the original requirements. Spell out the requirements thatapply to your selection of hardware, etc., and do so in the tables. Your customer would not appreciate having to guess asto which requirement is being met by your items.Don’t forget the components necessary for the computers to communicate with each other and connect to theinternet.Suggested layout for the tables (other layouts are possible):
Looking for a Similar Assignment? Order now and Get 10% Discount! Use Coupon Code "Newclient"
